Monday, May 10, 2010

FortiManager 4.0 MR2

After running FortiManager 4.0 MR2 for a while now it's been mostly smoothing sailing. There are some things to be aware of:

  • After FortiManager runs for extended periods of time the memory utilization goes to almost 100%. This can be fixed by a reboot
  • The "diag sys top" command is no longer implemented to view process utilization. Therefore it is difficult to understand which process is using most of the memory
  • This appears similar to an issue in early FM 4.0 MR1 releases where memory utilization would spike high also
at

2 comments:

  1. MarkusMay 10, 2010 at 9:38 AM

    You are right, "diag sys top" is not implemented any more, BUT you can use "exec top" to get the same result ;-)

    Another FortiFriend

    ReplyDelete
  2. AnonymousOctober 3, 2013 at 2:14 PM

    Thank you for suggesting the "exec top" command! I have trying to figure out how to get the same information as "diag sys top" used to, and I couldn't figure it out.

    ReplyDelete