We have had 4.2.4 running on some of our test systems for the past 24 hours with no adverse affects. Specifically CPU usage is staying within normal levels. I will also test this on the FWF 60C platform over the weekend.
Please post your feedback after you try it out.
10 comments:
Thanks for keeping us posted. :)
4.2.4 seems to be fine for us as well.
A lot of bug related a Wan Optimization still not fixed. I think Fortinet will fix these bugs only on 4.3
Is there a changelog for this release. Reason I asked is I want to know if a ping bug was fixed on this release.
Thanks.
Yes, every software release has the corresponding release notes in the firmware download folder.
No problems here on a FWF60B ... no special enhancements or addons
Sebastian,
I am hoping that you can offer some advice. I have a Fortigate 60b with a 3cx phone system running the 4.0 MR2 Patch 1 on the fortigate. I have tried your suggestions by doing the following cahnges.
config system session-helper
edit 1
set name pptp
set port 1723
set protocol 6
next
edit 2
set name h323
set port 1720
set protocol 6
next
edit 3
set name ras
set port 1719
set protocol 17
next
*** snip ***
edit 12
set name sip
set port 5060
set protocol 17
next
edit 13
set name dns-udp
set port 53
set protocol 17
next
end
To disable the SIP and H.323 session helpers use the following syntax:
config system session-helper
delete 12
delete 3
delete 2
end
Keep in mind to delete session helpers starting at the highest numbered one. Otherwise you may inadvertently delete the wrong session helpers if you are not careful.
*****
Update: In FortiOS 3.0 MR6 and above you should also try the following commands:
config system settings
set sip-helper disable
end
and
config system settings
set sip-nat-trace disable
end
everything works now calling in or calling from the inside out. but if I try to take a phone outside the network and point it to the public IP of the phone system It makes the call but no audio. So I think it is some sort of problem with nat on RTP Ports 9000-9049 that the 3cx phone system requires to be open but I cant seem to pin point the problem and fortinet support seems to be no help I have heard nothing back from them.
Your advice would be greatly appreciated.
Thanks,
Ryan
raclarke1@gmail.com
Having major issues on 60C with this and previous release with IPS. Almost constant 100% cpu usage results in traffic being dropped and management interface unresponsive to configuration changes.
C9300-24t-A csukjcsakj csa
C9500-NM-8X
saj xsjsa x hx
Post a Comment